WARRANTY AND SERVICE
Walter Meier (Manufacturing) Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Center located
throughout the United States can give you quick service. In most cases, any of these Walter Meier (Manufacturing) Inc. Authorized Service Centers can authorize
warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC
tools. For the name of an
Authorized Service Center in your area call 1-800-274-6848.
Walter Meier (Manufacturing) Inc. is consistently adding new products to the line. For complete, up-to-date product information, check with your local
Walter Meier (Manufacturing) Inc. distributor, or visit powermatic.com.
POWERMATIC products carry a limited warranty which varies in duration based upon the product.
WHAT IS COVERED.
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables
are excluded from warranty coverage.
WHO IS COVERED.
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE.
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED.
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are
used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to
misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you,
please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses
a defect, we will repair or replace the product, or refund the purchase price, at our option.
We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted
from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to
have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WALTER MEIER (MANUFACTURING) INC. LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED
HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
WALTER MEIER (MANUFACTURING) INC. SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT,
SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Walter Meier (Manufacturing) Inc. sells through distributors only. The specifications in Walter Meier (Mfg.) catalogs are given as general information and are not binding. Members of
Walter Meier (Manufacturing) Inc. reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may
deem necessary for any reason whatsoever.
Warranty reverts to 1 Year if above products are used for commercial, industrial or educational purposes
Y E A R
Y E A R
Vertical Panel Saws
Horizontal Panel Saws
Cut Off Saws
Oscillating Edge Sanders
Warranty and Service
The Gold Standard Since 1921