PM2000, 5HP 3PH 230/460V, 50" Rip w/Accu-Fence, Rout-R-Lift System


The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. Adjustable angle indicators on the blade tilt scale for repeatable bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated.


Quick release riving knife greatly reduces binding/kickback risk
Built-in retractable caster system for immediate shop mobility
Arbor lock for rapid blade change
Poly-V drive belt system delivers efficient, quiet operation
Wide stance heavy-duty trunnion for stability and smooth blade positioning
Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
Industrial-duty Accu-Fence® System ensures accurate cuts
Enclosed cabinet with cast iron base for rigidity
Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments.
Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
Independent leaf blade guard and anti-kickback pawls promote safe cutting
Industrial magnetic controls, and jumbo stop switch is reachable with the knee
Built-in 4" port for dust collection
Standard Equipment:
TEFC Motor with magnetic controls
Standard left and right cast iron extension wings
Accu-Fence® System with 50" to the right cutting capacity
Melamine-surface extension table, legs and Rout-R-Lift®
Arbor wrench
Motor cover
Blade and power cord plug not included
460V operation requires an additional 460V magnetic switch, part PM2000-293C


Style (Type)
Blade Diameter (In.)
Arbor Diameter (In.)
Arbor Speed (RPM)
Maximum Depth of Cut at 90 Degrees (In.)
Maximum Depth of Cut at 45 Degrees (In.)
Maximum Diameter of Dado (In.)
Maximum Width of Dado (In.)
Table in Front of Saw Blade at Maximum Depth of Cut (In.)
Maximum Rip Right of Blade (In.)
Maximum Rip Left of Blade (In.)
Table Type
Cast Iron
Table Height from Floor (In.)
Table Size (In.)
22 x 30-1/2
Table Size with Extensions (In.)
42 x 30-1/2
Table Size with Full Extensions (In.)
75 x 30-1/2
Table T-Slot (In.)
3/4 x 3/8
Dust Collection Minimum CFM Required (CFM)
Dust Port Outside Diameter (In.)
Motor Power (HP)
Motor Phase
Motor Voltage (V.)
Prewired Voltage (V.)
Motor Current (Amps)
Recommended Circuit Size (Amps.)
Wiring Remarks
460V requires additional magnetic switch